find out morehome design ebook
Design requirements for a common seal in a container shielded
are firstly that there should be a good conductivity between
opposing flanges through the gland. The first and most essential
the point is to ensure that the flange is in good contact with the
gasket screening, with mating surfaces smooth, clean, flat and
plated, if necessary, to provide a conductive surface. Poor
conductivity between the flange and gasket will result in poor
screening and, if there is no contact between the two subsequent
gap, can serve as a slot antenna transmit energy to a wavelength
that would be less than four times the length of the gap
Tidak ada komentar:
Posting Komentar